Raw material drying phase for future bio-fuel production is an important part that guarantees high quality of the finite product – bio-fuel bricks and pellets.
Among our equipment we also offer drying machine АКС-22 model, which we produce in Ukraine
.If raw material dampness exceeds 12-15%, it is necessary to set a machine that is meant for drying to reduce the level of dampness to optimal criteria. As long-term successful experience of our company and scientific research conducted in this area shows, the optimal dampness of raw material for bricks of "Pini-key” type is less that 10%, for pellets this number lies in the range of 14-18%, the same level of dampness is necessary for the raw materials from which the hydraulic brick will be produced. Thus, each type of raw material has its set optimal dampness, that is why the frying machine is one of the most important production part of eco-friendly fuel.
The dryer of the so-called "aero-dynamic” type is meat for drying small free-running??? Materials which were received as a result of chopping the woodwork and agricultural waste with dampness that does not exceed 50% and fraction to 2 millimeters.
Material supply is performed with the help of chain drive??? As well as electric motor gear with the power of 0,33-0,55 kWt. When raw material is londed into the bunker, its transit??? Is performed by aero-dynamic tunnel with the help of air extraction system i.e. the work of high pressure fan. The fan is put into motion by the electric motor having the power of 11 kWt (for АКС-24 model – 15 kWt) and effective vee-belt drive.
Excessive dampness evaporates from the raw material in the aero-dynamic tunnel under the effects of hot air flow which is heated to the needed temperature thanks to the process of burning different fuel ypes in futirovanny boilers. Coal, dvora??? And other types of solid fuel.
Raw paterial passess the tunnel just in 15 seconds. The dryer is produced on our plant in Lvov, the given technology was developed and patented in Ukraine.
Electricity box??? And detailed instruction are included
According to the buyers wish gauges, thermocouples, emergency stop device in case of exceeding the allowable temperatures and so on.
No special conditions except for installing a special offtake smoke fue is required to mantle the dryer. You cn get more detailed information about technical characteristics of our equipment on our website or conracting our company’s specialists.
Drying machine АКС-22 (production Ukraine)
It is important to install a dryeing machime for raw material the dampness of which exceeds 12-15% before putting it into the pricking or pelleting equipment. The optimal dampness of the raw material: "pini-key” brick – to 10%, hydraulic brick, pellet – 14-18% (each raw material type has its necessary optimal dampness).
The dryer of "aero-dynamic” type is meant for drying free-running material receibed as a result of chopping woodwork and agricultural waste with the dampness of about 50% and fraction to 2 mm.
Raw material supply is performed with the help of chain drive??? As well as electric motor gear with the power of 0,33-0,55 kWt. . When raw material is loaded into the bunker, its transit??? Is performed by aero-dynamic tunnel with the help of air extraction system i.e. the work of high pressure fan. The fan is put into motion by the electric motor having the power of 11 kWt (for АКС-24 model – 15 kWt) and effective vee-belt drive.
The raw material drying is performed in the aero-dynamic tunnel under the effects of hot air flow. The needed temperature is received by burning solid fuel in futiral boilers. The fule for boilers: wood, coal, all types of solid fuel.
The pass type of raw materials from the moment of its load to its exit takes not more than 15 seconds. Drying is manufactured in Lvov, the principles of its work are patented in Ukraine by our company. Dryer, electricity box, detailed instruction included.
Additionally according to the customers wish the following equipment can be also provided: thermocouples. Gauges, emergency stop by temperature rise etc.
The dryer’s mantle does not require any special conditions except for offtale smoke fue installation.
|Productivity (calculated outlet???) kg/hour||400-1200 (depending on type and dampness of incoming raw material)|
|Principle of work||Aero-dynamic channel|
|Boiler fuel||Solid fuel|
|Fuel consumption rate in boilers, kg/hour||30-100 (coniferous trees - 100 kg, solid fuels - 30-60)|
|Electric motor of the fan-power, kWt-nomenclative rotations||11 (15 kWt - АКС-24 model)3000|
|High-pressure fan-drive type||Vee-belt|
|Belt type, profile,||В|
|Number of belts, pcs||3|
|Belts length, mm||1490|
|Electric motor gear-power, kWt-nomenclative rotations||0,33-0,55 16-40|
|Raw material supply drive||chain|
|Energy sourse, V,Hgz||380/50|
Boilers number - 2-3-4. Calculated incoming raw material dampness to 50%. Parameters can be changed depending on the conditions of equipments placement and customer’s wishes.
Equipment can be manufactured in accordance with your needs and requirements.